Others also read
| In the structural design of facade glazing, various types of loads such as dead weight, wind and climatic loads must be taken into account. In practice, however, there are many cases of damage that can be attributed to direct solar radiation.
| The main challenge in the design of the duplex fa莽ade was the high aesthetical performance that the fa莽ade had to meet.
| Measurement area separated from glass sheets with buffer plates
| Measurement area in direct thermal contact with specimen
Investigations on the Cold Bending Behaviour of a Double Glazing Unit with a Rigid Edge-Spacer Frame
| In this study, the bending process of specially-fabricated double glazing units (鈥榩anels鈥) is investigated with a focus on a local instability phenomenon.
| The paper presents the results of FEM analysis as well as tests performed on double glazed units including Sikasil庐 IG-25 secondary sealing joints and SikaGlaze庐 IG-5 PIB as primary seal.
| The goal of this work is to investigate the mechanical performance of VIG鈥檚 subjected to soft body impact and gain insight into the failure mechanisms of the VIG when exposed to dynamic loads.
| Making new and existing buildings as energy efficient as possible is one way to help meet the EU鈥檚 CO2 reduction goals.
| The significance of balancing operational and embodied carbon continues to grow.
| Global environmental concern is motivating efforts to improve energy efficiency in all industrial sectors. And glass tempering is no exception.
| Five commercial glazing system analysis and a project study show the advantages of using Insulated Glass Unit (IGU) edges to mechanically attach glass to buildings.
| 黑料专区 production is an energy-intensive process by its nature, so even small reductions there can result in considerable savings in energy and costs.
| Limiting global warming require 鈥渞apid and far-reaching鈥 transitions in land, energy, industry, buildings, transport, and cities.
| This paper explores the flexural strength of recycled cast glass鈥攁 property relevant to the engineering practice.
| Constructions at exceptional locations are often challenging but worth one鈥檚 while. Extreme boundary conditions and sophisticated demands of the client have to be considered.
| Building code requirements for wind-borne debris protection have been in existence since the mid- 1990s, and as a result, many glazing systems have been tested and certified to these performance requirements.
| One-Step Multi-Air Pollutant Control Solution.
| The Swiss society of engineers and architects (SIA) initiated a structural glass standard committee with the task to develop a Swiss glass design standard.
| The present work uses non-linear material laws for FEA and exhibits the behavior of the sealant joint in various load scenarios on several projects.
| The present paper presents an ongoing research project considering the failure of glass at high strain-rates. It provides a brief review of existing studies showing a strength increase with loading rates relevant for e.g. blast loads.
| This study forms part of a wider research programme that aims to better address the end-of-life challenges and opportunities in fa莽ade design for re-use.
| In today鈥檚 architecture the bending of glass plays an important role in achieving free forms in modern fa莽ades.
| The simulation tool provides an accurate definition of the internal pressure, deflection and stress on glass panels and forces through the sealant silicone with a reduced pre-post and calculation time, being ideal for parametric studies.
| Here, comparisons are made with numerical analyses, performed by implementing an ad hoc routine in the software Straus7, developed by Maffeis Engineering.
| The post-breakage behavior of glass beams is not easy to predict, therefore Octatube performed a range of tests on different glass fins varying the test setup.